Apple has released AirPort Base Station Firmware Update 7.6.4 to correct three specific issues on all 802.11n AirPort base stations (AirPort Extreme, AirPort Time Capsule, and AirPort Express). It fixes a problem that could cause an intermittent loss of Wi-Fi connectivity with iOS devices and addresses an issue that could cause an AirPort Time Capsule to report that the backup disk is in use. Additionally, the update fixes an IPv6 Tunnel error that was introduced with Firmware Update 7.6.3. You can update your AirPort base station using AirPort Utility via either your Mac or an iOS device (with the free AirPort Utility app installed). Click or tap the base station with a red circle sitting to its right, then click the Update button on the Mac or tap Version > Download and Install on your iOS device. (Free, 728 KB)
ChronoSync Secret Menubar Shortcut
For a quick way to run a ChronoSync document without opening it, use the ChronoSync menu in the menubar. Select "Show ChronoSync menu in menubar" in ChronoSync's General Preferences window to activate the menu bar menu. Once activated, you'll see the ChronoSync circling arrows icon in the menu bar, at the top right of your screen.
You can open any scheduled ChronoSync document directly from the menu bar. If you hold down the Option key while selecting a ChronoSync document, the synchronization will run immediately without the ChronoSync document opening.
Visit Econ Technologies
AirPort Base Station Firmware Update 7.6.4
Check out the perks at <http://tidbits.com/member_benefits.html>
Special thanks to Ken Lukawy, Ronald Sweet, Bob Vennerbeck, and Pam
Lund for their generous support!
No problems at this time. Will post again if something comes up.
Impact: An associated client may be able to cause an unexpected base station system termination
Description: An issue existed in the parsing of small frames with incorrect lengths. This issue was addressed by adding size checking to the parsing of small frames.