Thoughtful, detailed coverage of the Mac, iPhone, and iPad, plus the best-selling Take Control ebooks.

 

 

Pick an apple! 
 
Copy Existing Filename to 'Save As' Field

While many utilities provide file naming automation, they're mostly overkill for those cases when you need to make small variations in file content while ensuring the documents group together in a "by name" list.

In the Save As dialog, the default name is the current document name. You can quickly change this to match any existing file.

1. Make the list of files the active element.

2. Click on a grayed-out filename, which momentarily turns black.

3. The Save As field now contains the filename you just clicked.

You can modify the name (adding, say, "version 3") or overwrite that existing file you clicked.

Submitted by
Jesse the K

 
 

The Case for a Low-end Plastic iPhone

Send Article to a Friend

Rumors of a cheaper iPhone with a plastic case replacing the glass-and-aluminum cases of the last few iPhone models have been flying for years, but a video released to YouTube by user DetroitBORG provides some convincing evidence. In the video, he shows off a white plastic iPhone back panel, provided by blogger Sonny Dickson. If the part is fake, it’s an amazing forgery, as it even includes chassis components like the digitizer and camera lenses.

I doubt the case shown is fake, but it could just be an Apple design experiment. However, Dickson has also posted photos of similar back panels in a rainbow of colors, implying that they’re being mass produced. If so, that would suggest a plastic iPhone debuting later this year, likely in conjunction with iOS 7.

The more interesting question is: why might Apple return to plastic for the case? When the company killed the white plastic MacBook in early 2012, it seemed as though it would be the end of plastic Apple devices, apart from AirPort base stations and the Apple TV boxes.

The usual answer is to have a cheaper device for emerging markets and to compete at lower price points. Despite other products lagging in sales, the iPhone is booming, especially in emerging markets like India, which saw a 400 percent increase in sales in Q3 2013 (see “Apple Q3 2013 Results Repeat Higher Revenues and Lower Profits,” 23 July 2013). Based on Tim Cook’s comments during that investor call, it’s the older models of iPhone — the 4 and 4S — that are largely driving that growth.

But why not just keep selling older models at a discount, as Apple has done so far? When the next iPhone — call it an iPhone 5S — comes out, Apple could drop the iPhone 4, make the iPhone 4S free with a two-year contract, and sell the iPhone 5 for $99. Why not do that? Because the iPhone 5 is an expensive device to make. Although the materials costs for the iPhone 5 aren’t that much different than the iPhone 4S, having been estimated by iSuppli at launch to be between $207 and $238, depending on storage capacity (the previous model ranged from $196 to $254), the problem may instead be manufacturing yield.

As Apple’s Senior Vice President of Design Jony Ive boasted at the iPhone 5’s launch, Apple’s fit tolerances are so tight that iPhone 5 front and back panels have to be matched with a high-precision camera to within a few microns of each other. To put that in perspective, a human hair is about 75 microns wide. That’s a tough feat to pull off in manufacturing, and it’s likely that many iPhone 5 casings have to be rejected.

While we can’t be sure what the yield rate of the iPhone 5 is, we can look at Apple’s reported cost per sale to see the impact. In the chart below, we see that Apple’s cost per sale plummeted in the first half of fiscal year 2012, but rose a whopping 67 percent between Q3 2012 and Q1 2013. What changed?


In short, the iPhone 5. It was released 21 September 2012, right at the tail end of Apple’s fourth quarter. Costs began to trend up in Q3, just before its debut, and in Q4, we start seeing Apple’s costs moving in sync with iPhone revenues.

Apple has since taken a hit to its gross margin, which is down nearly 6 percent from a year ago, a worrying trend for investors, and the iPhone 5 is a likely suspect. With such a difficult manufacturing process, Apple may not be able to justify lowering the price of the iPhone 5 as it has in the past with previous iPhone generations. And at the same time, the company is clearly looking hard at what’s necessary to satisfy developing markets with a less-expensive iPhone.

As for the internal components, they could be identical to the iPhone 5, to take advantage of those parts becoming cheaper over time and of economies of scale in purchasing. Wrapping the iPhone 5 in a plastic case exploits those lowered costs and trades pricier glass and aluminum for molded plastic, all while sidestepping the thorny precision construction of the iPhone 5’s casing. Such an approach also gives Apple the opportunity to release an iPhone 5S with improved specs to create price differentiation in the iPhone product line.

 

READERS LIKE YOU! Support TidBITS by becoming a member today!
Check out the perks at <http://tidbits.com/member_benefits.html>
Special thanks to Charles Crouch, Colin Gurley, Ray Bryant, and
William Geraci for their generous support!
 

Comments about The Case for a Low-end Plastic iPhone

eugene  2013-07-24 16:53
Could it not be just a Chinese made iPhone being shown? They've already copied the 4S. It looks about the same, with a slightly smaller screen and with android system. Search on Alibaba and you will see a lot of them.
Josh Centers  An apple icon for a TidBITS Staffer 2013-07-24 17:59
Like the Basic Bear? http://techdy.com/shop/basic-bear/

It's possible. I actually hope to be wrong, as I think a plastic iPhone is pretty lame. But there's a strong business case for it.
Is it going to be plastic or liquidmetal using superspeed pulse mould technology
Josh Centers  An apple icon for a TidBITS Staffer 2013-07-24 19:01
We've been hearing about liquidmetal for years, but as far as I know, Apple's only used the technology for a SIM card extractor.

I could see them possibly using it in a future iPhone to make something that is thin, durable, and easy to manufacture. But until that happens, it's just science fiction.
Rob Lewis  2013-09-06 10:48
I've been wondering when Apple would commercialize its liquid metal investment in earnest, and this may be the time. The technology appears to have lots of potential. Of course, I don't think you can mold liquid metal in rainbow colors like plastic, so there's that.
d.sprinter  2013-07-30 17:47
I don't own an iPhone because I don't text or call that much. For me, it's not worth it to spend $600 for a phone. I have many other Apple products, including Apple TV, but the iPhone has never been big on my list. If the supposed plastic iPhone is around $400, than I might consider buying one. From what I read, I thought that only the "cheaper" iPhone would be plastic, not the more expensive one. While some people laugh at the idea of a plastic iPhone, others note the alleged variety of colors and the fact that the first iPhone was indeed made of plastic.