Skip to content
Thoughtful, detailed coverage of everything Apple for 33 years
and the TidBITS Content Network for Apple professionals
An iPhone recording a concert

Photo by veeterzy

2 comments

TipBITS: Make Sure Your iPhone Is Capturing Video

It’s surprisingly easy to think you’re recording a video on your iPhone, only to realize later that you didn’t tap the record button and totally missed that great moment. Adam Engst and I have both flubbed recordings in this way on multiple occasions, and we know from helping our families that we’re not alone. Here’s how to make sure your iPhone is recording, so you don’t fail to capture a special video.

You probably know how to record a video on an iPhone, but just in case:

  1. Open the Camera app.
  2. Enter Video mode by tapping the Video label or swiping the viewfinder.
  3. Tap the red record button to begin recording.

The Camera app before recording video

It’s simple, to be sure, but the problem is that if you fail to tap just the right spot, you may think you’re recording, but nothing is actually happening. (You can also press one of the physical volume buttons to start and stop recording, but that’s a different tip!)

There are three changes to be aware of as you think you’ve started recording to make sure it’s working, along with one other piece of minimal feedback:

The Camera app during video recording

  • The record button changes from a large red circle inside a white ring to a stop button, a smaller red square inside a white ring. Particularly for those whose eyesight isn’t what it once was, it can be difficult to see the difference between the record and stop buttons. A more significant change in shape or color would be welcome.
  • The bar at the top of the screen that displays flash status, recording time, and resolution and frame rate shrinks down to show just the timer, which begins counting how long you’ve been recording and adds a flashing red dot. This change can also be hard to notice because you have to see the disappearance of interface elements, and the rightmost digit in the timer takes a full second to change.
  • The labels for different types of video and photo modes disappear, as does the button for switching between the front and back cameras. Plus, the well containing the last photo or video is replaced by a white circle you can tap to take a still photo during video recording. Again, these changes are sufficiently minimal that they can be easy to miss as you look from your screen to the scene in front of you and back.
  • If you’re using an iPhone that supports 3D Touch, you’ll feel a very light simulated click when you tap the record or stop buttons.

Train yourself to watch for these changes and you’ll be a lot more likely to know when the iPhone is (or isn’t) actually recording.

Subscribe today so you don’t miss any TidBITS articles!

Every week you’ll get tech tips, in-depth reviews, and insightful news analysis for discerning Apple users. For over 33 years, we’ve published professional, member-supported tech journalism that makes you smarter.

Registration confirmation will be emailed to you.

This site is protected by reCAPTCHA. The Google Privacy Policy and Terms of Service apply.

Comments About TipBITS: Make Sure Your iPhone Is Capturing Video

Notable Replies

  1. I think your third suggestion is the most “obvious” one to look out for. In no other situation is that white circle present - and it’s visible, if you know where to look for it, in just about any ambient light conditions.

  2. The only problem with the white circle is that if you’ve taken a very light photo or video as the last on, there may be almost no visible change in that area in the screen. I think I’ll be paying attention to the flashing red dot from now on, but it’s telling that I didn’t know it was there until we wrote this article.

Join the discussion in the TidBITS Discourse forum

Participants

Avatar for ace Avatar for jcenters Avatar for iwt